Monday, April 24, 2017
Breton Tee
Here's the "simple" project I've been looking forward to after my denim jacket adventure. This should have taken me an afternoon, but that's just not the way my life works.
First, the fabric. I'm a sucker for stripes. I have waaaaaay too many striped tees but they all seem to be wearing out at the same time so good excuse for a replacement, right? I wanted a Breton-like stripe, with wider white stripes and narrow black stripes. I found the perfect ecru/black St. James ponte at Mood, but I hesitated at the $18/yd price. So I left the tab open in my browser and decided to think on it for a day or two. I finally decided I had to have it, opened the page, and hit order. Only when I got my confirmation did I realize I'd looked at multiple colors and I accidentally ordered the ecru/navy. Which is fine, I wear too much black anyway, and the navy is so dark I might just wear it with black sometimes. The fabric is amazing: rayon/polyester/spandex ponte that feels heavenly. I want to wear it all the time!
The pattern is self-drafted. I made a top from it a few years ago and I'm kind of heartbroken that it's almost worn out. It was made in a similar ponte and I happily wore it way too much. I didn't baby it, though. It went through the washer and dryer every week for at least a couple years. It was a little bit too short and the sleeves were a little bit too snug. I decided to re-draft the pattern with more length (1") and ease (2"). Big mistake. This fabric stretches and grows like crazy. I hemmed the sleeves and bottom before I did anything else. (There are side slits so the back and front are hemmed separately.) Then I switched the thread from my cover stitch to my sewing machine and did the shoulders, neck, and sleeves. I did try it on at this point to make sure the side seams would be ok, but it seemed like it would be a relaxed fit so I went ahead and sewed up the side seams from wrist to side slit. It was HUGE!! I ended up taking out about 4" in circumference in the bodice and at least an inch in the sleeves, but I left the length because of laziness.
I've worn this top a couple times but I haven't washed it yet. I hope there's some shrinkage, otherwise I'm going to have to do some major surgery to make it something I'll wear often. And as much as I hate altering anything, I'll do it for this fabric. It's worth it!
Monday, April 3, 2017
Denim Jacket, Take 2
I love my white denim jacket and I've been wearing it a fair amount, but I wasn't 100% happy with the pattern or the fit It's actually too small across the hips and I can't fasten the bottom button. There are very few, if any, situations where I would button up the jacket, but it still bothers me. So despite having no need and very little desire for another denim jacket I plowed ahead with number 2.
I had some dark denim that I bought to make jeans but I hadn't gotten around to using it primarily because even after a few washes it still turns everything it touches, including the inside of my dryer, blue. (BTW, Mr. Clean Magic Eraser will remove blue stains from the inside of the dryer.) So first order of business, get rid of some of the dye!
I didn't want to do anything drastic, just remove the excess dye, so my first instinct was to use Rit Color Remover. I read the directions on the back of the box, filled my garage sink with hot water, got my chemical-resistant rubber gloves out, set the fabric out, then I opened the box and read the complete directions where it says in teeny tiny letters "do not use on blue denim." Not to be deterred I checked the Rit website where it explains that Rit Color Remover does not work on the indigo dye used on denim because it will dissolve the dye into a soluble form, which is then absorbed back into the fabric when the Color Remover is rinsed away. But since I had everything ready to go, and there were no warnings about dangerous chemical reactions or anything like that, I went ahead with my color removal plans to see what would happen.
After dissolving the Color Remover in the water and adding the denim, the water quickly turned from pale green, to thick pea green, to murky dark blue.
At least some of the dye was leaving the fabric, right? I stirred the fabric constantly with my gloved hand so the color would be even, and after about 25 minutes fatigue won out and I drained the sink and rinsed the fabric.
Remember the Dr. Seuss book, "The Cat in the Hat Comes Back"? Remember when the Cat in the Hat left a ring in the tub?
"A big long pink cat ring!
It looked like pink ink!
And I said, 'Will this ever
Come off? I don't think!'"
That's what I thought when I looked at the sink!:
(BTW, Mr. Clean Magic Eraser will NOT remove blue stains from a vinyl garage sink. But lots of Comet helps.)
The right side is slightly lighter and the wrong side is considerably bluer. *Sigh* But hey, I was warned, and now I know.
At this point there wasn't much to do besides use the fabric as-is. There were lots of pattern changes which I won't detail here because for the upcoming version #3 I used all the pieces to make a rough jacket block then redrafted the whole thing.
Funny thing, on the day I was scouting the mall for the best denim jackets, trying to decide what details I wanted to include in my "final" version, Alina Design Co's Hampton Jean Jacket pattern was released. I've got to say, I LOVE all the pictures I've seen of this pattern sewn up. I would buy it, except that I've already invested a lot of hours into coming up with a pattern that fits my body and my needs (except that I neither need nor want another denim jacket, but that's beside the point...).
Funny thing, on the day I was scouting the mall for the best denim jackets, trying to decide what details I wanted to include in my "final" version, Alina Design Co's Hampton Jean Jacket pattern was released. I've got to say, I LOVE all the pictures I've seen of this pattern sewn up. I would buy it, except that I've already invested a lot of hours into coming up with a pattern that fits my body and my needs (except that I neither need nor want another denim jacket, but that's beside the point...).
By the time I finished my second jacket I pretty much hated it. The fabric was stiff and it turned my fingernails blue every time I worked on it. Which left only one thing to do - bleach the heck out of it.
If I loved the jacket I probably would have tested some samples in the bleach, but with nothing to lose I jumped right in. I filled a 5-gallon bucket about halfway full with approximately 5 parts hot water and 1 part bleach, mixed it with my gloved hand, and added the jacket which I had previously soaked in water. I kept agitating the jacket with my hand so it would lighten evenly, and the bleach worked so fast I could actually see the fabric getting lighter! After only about 6-7 minutes in the bleach solution my jacket was lighter than I had planned and I was desperately trying to dump out the bucket without hurting myself (safety goggles would have been really helpful!) and get the bleach rinsed out. The jacket went into the washing machine where it was washed in hot water, then dried on high heat, and here it is!:
Ok, I may have used too much bleach but at least I didn't have to wait around for it to work, right? It's not a great color for me so I'm not sure how much wear I'll get out of this. But it was absolutely worth all the lessons learned! I've made a lot of pattern changes and pattern #3 is ready to cut out, as soon as I decide what fabric to use. Another white denim jacket? White linen? Blue denim with less bleach? I'll think on that for a few days, and in the meantime I'm working on something quicker and easier to make.
Tuesday, March 7, 2017
Excuses, Excuses... and a Denim Jacket
Dear Blogger, it's been a long time. I've been busy, and I have a lot of really good reasons for ignoring my blog. Yes, really good reasons. First, my sewing room was a mess and I couldn't take photos until I cleaned it. Then I never really learned to use my new camera. Then my sewing room was too dark for photos. Yep, all my excuses revolve around photos. My goal sometime this year is to find and/or set up a spot in my house where it's convenient to take pictures. In the meantime, let me introduce my latest creation with the best photos I can get under the circumstances.
Here is my new denim jacket, tossed on my sewing room floor:
Four years ago I sewed the Islander Jacket Express. The pattern was drafted well, the instructions were thorough, and the Craftsy class was well worth the money. My jacket turned out well, but I never wear it. It isn't quite "me". The collar is too big, the edges are too round and the fit is too boxy. I decided to use the pattern as a starting point for a more traditional-looking denim jacket. And I'm calling this white jacket an overwhelming success.
Pattern changes:
Narrower, pointed collar
Narrower cuffs with square corners
Reshaped upper pockets and flaps
Narrower sleeves with higher sleeve cap
Removed excess length and width from front
Lengthened jacket and added band at bottom edge
Placed buttons closer together
The fit isn't perfect, but it's loose enough through the back and shoulders that I can move my arms freely and it's fitted enough in front that I'm not swimming in it. The fabric is bull denim from JoAnn Fabrics. It's firm enough to hold the shape of the jacket but soft enough to sew through easily and wear comfortably. I don't usually praise fabric from JoAnns, but this denim was perfect for my jacket!
A close-up shot of my pointy details (so much more "me" than the round collar and pockets):
I've got a second jacket in the works because I wanted to perfect the fit. It's a different fabric and a whole new set of adventure. More details later... unless I remember all the excuses.
Monday, March 7, 2016
Vogue 9099, The Couture Blazer
I should really call this the Very Imperfect Semi-Couture Blazer.
I was so excited when I bought this pattern. The last time I did any tailoring was in 1984 when I spent the summer working on my 4H project with MUCH help from my mom. I've been wanting a nice blazer for years, but I'm too picky about fit to buy one.
I wasn't intimidated by the pattern. I can sew at an advanced level when I want to and I'm not afraid to try anything. But OH the hand work involved! It wasn't hard, but SO time consuming. I think I watched at least 2 seasons of Gilmore Girls on Netflix while I made this blazer.
Before Christmas (and before the Gilmore Girls marathon) I made a muslin, which was a good thing because I totally slashed across the back to add shape and length, I recut the front with a small bust adjustment, and I tried out two different sizes of sleeves. (Turns out I'm a 14 in the shoulders, waist and hips, and a 10 in the arms. Who knew?) I also narrowed the shoulders, which I have never had to do before, and changed the roll line so I could add a 3rd, higher button at the front.
At first I was stumped by the SBA and how the shoulder dart would work with that. I suppose I could have looked up how to do it but that would take all the fun out of the project, right? Here's what I ended up doing:

This isn't meant to be a tutorial but I thought it might be helpful to someone in the same situation. Picture #3 shows what the altered pattern piece looked like. #4 is to show the effect of the alteration. I can't say how this would work for someone else, but it was a life-changing revelation for me and I love the fit of the new pattern piece. (And I probably should mention that I had to change the position of the upper pocket, aligning the grain of the pocket welt with the new grainline of the upper chest.)
At first I was stumped by the SBA and how the shoulder dart would work with that. I suppose I could have looked up how to do it but that would take all the fun out of the project, right? Here's what I ended up doing:

This isn't meant to be a tutorial but I thought it might be helpful to someone in the same situation. Picture #3 shows what the altered pattern piece looked like. #4 is to show the effect of the alteration. I can't say how this would work for someone else, but it was a life-changing revelation for me and I love the fit of the new pattern piece. (And I probably should mention that I had to change the position of the upper pocket, aligning the grain of the pocket welt with the new grainline of the upper chest.)
Besides the fitting, here's what I learned from this project:
1. Hand sewing is not the enemy. Hand basting can be a wonderful thing, and hand stitching in general can be kind of relaxing. That said, I'll skip as much of the hand stitching as possible the next time I make this pattern.
2. I wouldn't use this pocket flap pattern again. I thought the pockets looked wrong on the pattern envelope and I couldn't quite figure it out. I think the problem is that the flaps are rectangles, folded right sides together and stitched up the sides. I tried to make the underneath half of the rectangles smaller, but in the end the flaps didn't want to curve around the body, even after heavy steaming over a pressing ham, and the sides are stiffer than the bottom edges. Next time I'll cut separate flaps and linings and probably round the corners a bit.
3. Hand buttonholes? I didn't even try. My machine makes fairly presentable keyhole buttonholes and I'm sure they look better than anything I could attempt by hand.
4. Next time I'll move the roll line back down and get rid of that top button. I thought it worked better with my shape but after seeing picture I'm not so sure. But then, it's not like I'll really wear it buttoned up... Also, I chose not to lengthen the pattern for my long torso and I should have. Next time for sure.
5. In the Vogue patterns I've used the sleeve cap seems to be too high with too much ease. Next time I'll see if I can flatten it a little and eliminate most or all of the ease.
1. Hand sewing is not the enemy. Hand basting can be a wonderful thing, and hand stitching in general can be kind of relaxing. That said, I'll skip as much of the hand stitching as possible the next time I make this pattern.
2. I wouldn't use this pocket flap pattern again. I thought the pockets looked wrong on the pattern envelope and I couldn't quite figure it out. I think the problem is that the flaps are rectangles, folded right sides together and stitched up the sides. I tried to make the underneath half of the rectangles smaller, but in the end the flaps didn't want to curve around the body, even after heavy steaming over a pressing ham, and the sides are stiffer than the bottom edges. Next time I'll cut separate flaps and linings and probably round the corners a bit.
3. Hand buttonholes? I didn't even try. My machine makes fairly presentable keyhole buttonholes and I'm sure they look better than anything I could attempt by hand.
4. Next time I'll move the roll line back down and get rid of that top button. I thought it worked better with my shape but after seeing picture I'm not so sure. But then, it's not like I'll really wear it buttoned up... Also, I chose not to lengthen the pattern for my long torso and I should have. Next time for sure.
5. In the Vogue patterns I've used the sleeve cap seems to be too high with too much ease. Next time I'll see if I can flatten it a little and eliminate most or all of the ease.
After months of working on this project, I can safely say I don't feel the need to put this much effort into an item of clothing for a very long time.
Bloopers:
Yes, I realize the pocket welts are wrong side out. No, I didn't realize it until after they were sewn on, slashed and turned. I'm just going to say I like the contrast and call it a happy accident, because that's what we do when we sew, right?
Friday, July 24, 2015
A-Frame Skirt
In the meantime, some new changes in my life mean I'll be needing a few more skirts. On Wednesday I saw the A-Frame Skirt pattern by Blueprints for Sewing on Pinterest. (Pinned by Indiesew.com - thankyouverymuch!) I've recently decided to do my part in supporting indie pattern designers by buying their patterns so I quickly checked this one out. Not only does the pattern include the really cute pencil skirt that I can't wait to make, but there is also an a-line version for softer, drapier (drapey-er? is this even a word?) fabrics. I just happened to have a few yards of rayon challis sitting in my sewing room waiting to be turned into something... but I couldn't figure out what. Within 30 minutes of seeing that pin, I'd bought the pattern, printed the PDF, and was busy taping it together on my cutting table. I had the skirt cut out and started by that evening.
On Thursday I finished the skirt, today (Friday) I took the pictures (still trying to figure out my new camera and the remote viewfinder on my phone), and here it is! I made a straight size E since this skirt isn't fitted and I think it fits pretty well. Next time I'll make the waistband a little smaller. Also, the center front piece is cut on the bias which hangs really nice and gives it a little stretch across the font, but I feel like the weight of this fabric pulls the piece down a lot and therefore makes it narrower across the belly than it should be. (That's an issue with my fabric and my body, not with the pattern!) It's not even an issue except for when I put my hands in the pockets and it pulls a little across the front. Next time I might try cutting the center front on the straight grain and see what happens.
Oh yes, this skirt has pockets! Not that this fabric will hold anything heavier than a lens cap, but it's nice to have a place to put your hands when you don't know what else to do with them.
I can't wait to make the pencil-skirt version of this pattern!
Monday, November 10, 2014
Sewing Jeans, the Second Pair
Second pair of wearable jeans, check! These ones are my version of skinny jeans, which means close-fitting but not super tight. They fit pretty much the way I want right out of the dryer, but after a few hours of wear they stretch out about 10% in width through the hips and thighs. So, do I make my pattern smaller but risk not being able to get them on, do I live with the extra bagginess, or do I use a different fabric? The next pair will have some spandex in them so I'll see how that works. I still have a list of fitting changes to make to the pattern but I feel like each pair should keep getting better. This has been really fun so far and I can't wait to have a whole new jeans wardrobe!
Monday, October 27, 2014
Sewing Jeans, part 3 - The Finished Product
Yay, the jeans are done! I sewed the back in part 1, the front in part 2, and now it's time to put it all together.
For the most part this was really easy. I basted the inseam together, all the way from one ankle to the other, with a long machine stitch. The thigh area is longer in the front than in the back so I had to stretch the back A LOT. (Which tested my patience A LOT, but I think the results were worth it.) I then basted the side seams together with the chain stitch on my cover stitch machine. I have to say that's a huge time saver when I know I'm going to remove a basting stitch - as long as I can find the right thread to pull the whole seam disappears in a couple seconds! I tried the jeans on to make sure the fit was good enough, and yes it was!
I whipped out those chain stitches in the side seams, sewed, serged and topstitched the inseam (and left the basting stitches in place), sewed and serged the sideseams, and wow, they look like jeans!
The waistband was a little more time consuming. I followed the suggestion in Kenneth King's Jean-ius class on Craftsy and cut a straight waistband then steamed it into a curved shape. It's probably a great idea for someone with a fairly straight waist but I have a lot of curve between my waist and hip so I need a lot of curve in a shaped waistband. Next time I'll try a contoured waistband so I can compare the results.
Otherwise the waistband went on quickly, except that I somehow made a little mistake on the front edge and forgot to compare the two waistband edges before topstitching, and they are absolutely not the same size. To make things worse, my sewing machine completely refused to make a buttonhole between all those thick seam allowances. I finally just cut it, zigzagged around it the best I could, added a few hand stitches, and called it a day. I know when I'm beat.
I really like the "boyfriend" fit of these jeans when they're rolled up. Not so much when they're not rolled up. Then they just look big and sloppy. But that's ok, these will be great spring and summer jeans. I've learned some things about how jeans fit my body and I'm already halfway into a slimmer fitting pattern. Regardless of style, these are the best fitting jeans I've ever owned and I'm really looking forward to making some more.
Subscribe to:
Posts (Atom)
Puzzle-Piece Pattern
“It’s not the writing part that’s hard. What’s hard is sitting down to write.” -Steven Pressfield, The War of Art I’m c...
-
Ok, so I never thought I'd wear a pair of wide leg pants. Maybe if I were taller or thinner or younger or hipper, but I was very muc...
-
“It’s not the writing part that’s hard. What’s hard is sitting down to write.” -Steven Pressfield, The War of Art I’m c...
-
Nope, haven't perfected the fit yet! I've been working on these jeans on and off for too many weeks... with a coup...













